It’s an obvious one, but check the internet is working in your house. Use the Wi-Fi or an Ethernet cable on a mobile or laptop, to see if you can connect.
 
If you can’t connect, give your broadband provider a quick call.

Time to head round the back of your box. We’ll walk you through what to do.

 First things first, we need to check how your box is connected to your router. Pick your connection: 

Direct Ethernet cable

• Check the Ethernet cable is securely connected to the Ethernet port. To be safe, disconnect and reconnect it.
• Follow the cable from your box to the back of your router and make sure it's securely connected to one of your LAN ports.

Powerline adapters

• Check the Ethernet cable is securely connected to the Ethernet port. To be safe, disconnect and reconnect it.
• There should be two powerline adapters plugged in to your mains. One by your YouView box and one by your router. Check both adapters are switched on and make sure the Ethernet cables are securely connected.

1. Open the Main Menu
2. Select Settings*
3. From Information & Reset select Software Information
4. Select Update players & apps

*Depending on your box model, Settings will be on the last tab on the Main Menu or in a cog in the top right corner of the screen. You can get to the cog by pressing Up after opening the Main Menu. If you have the new Home Screen, you can access settings by pressing Up and then right after opening the homes screen.

The simple old trick of restarting your router can help resolve this issue. Switch it off at the plug for 30 seconds and turn it back on. Give it a minute or two to warm up then check if you’re reconnected.

Please don't leave this page while your router is restarting as you won't have any internet access.

Using Powerline Adapters?

Make sure you switch both adapters off for 30 seconds and then turn them back on. Give them a minute to reset and all the lights will come back on.

Check your box has a stable connection to the internet. You can check this on your box through the steps below.

If you have a wired connection:

1. Open the Menu
2. Select Settings*
3. Select Broadband Connection
4. If it says your box is not connected select Edit connection and then Auto connect

*Settings can be found via the cog in the top right corner of the Menu. You can get to the cog by pressing Up and right after opening the Menu.

The old “switch it on and off” routine. Overused but it can often help resolve the issue. Press and hold the  button on your box for 8 seconds, then let go. You’ll be greeted with a friendly ‘Hello’ telling you that your box has restarted.

We didn't think you'd end up here, but thanks for trying all the above steps.

We'd suggest contacting your service provider for further help.